I’m assuming this will fit the C8 and many S-series lights. 8A is suitable for the SST-40 and SFT40, but will likely be limited by forward voltage with most emitters.

5A is running a 519A, SST-20, etc… fairly hard, while 3A is a pretty average single-emitter light.

  • turtlepwr@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I ordered ten 5A drivers. I’m pretty excited about these. Anyone else bulk ordering and moving a lot of hosts over? Gonna build my first W1 S2+ too!

  • Reader9@programming.dev
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    According to the Convoy BLF thread there is also an 8A buck driver coming in 20mm size. That (or these new 17mm drivers with an adapter) enables more options for the S21A as well.

  • Reader9@programming.dev
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Ordered the S6 with CSLNM1 and requested the 5a buck driver for an 18350 pocket thrower, hopefully.

    5A is running a 519A, SST-20, etc… fairly hard,

    I think that statement might apply to this Osram emitter as well.

  • masterironchef@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I wish they had these available couple of years ago; I moved all my self-assembled lights to 21700 Hosts because cheap buck and boost drivers were only available in 20mm and 22mm sizes.

    • Zak@lemmy.worldOPM
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I haven’t been building a lot of DIY stuff lately, but I have a C8 I think is going to need one of these and the upcoming high-CRI SFT40.