I recently got my first 3D printer to my place just a couple weeks ago! I thought it would be really nice to keep a small sample of each of my filaments printed out so that I have a readily-available example of what each actually looks like.
Does anybody else do this? If so, which part(s) do you use? I spent probably 15-20 minutes looking for a nice, small, low-poly object that I really liked.
You must log in or register to comment.
I use something like this to keep an example of filaments I have used. It is customizable to you can add your own text.
Nota bene that author asks that folks use the printables link so they can earn filament from the downloads. It’s linked in that thingiverse entry but here’s the direct link:
I’ve been trying to figure out how I’ll keep track of which filament corresponds to which egg in the future when I have a lot of them. Yours takes care of that. Solid choice
I use this one. There are probably better ones, but now I have holders and cases for them, so there’s no going back now.
You can see what the filament looks like by looking at the filament.
Having samples makes it easier if you have a lot of filament, and in my case I have a bunch of cards in a box I can easily carry with if I get a request and want to show them their options.
They kinda look like Easter eggs that didn’t render properly
Still waiting for the texture pop to hit
I use this one. They’re cards, you can print a box to hold them, they have text easily editable with OpenSCAD.
The swatches have been the most common answer so far, I think. I’ll likely switch over to something like that in the future and use the eggs for some other decoration or whatever
I do a benchy whenever I get new filament. It’s relatively small and since it’s technically a torture test it lets me know if there are any potential issues to look out for with that particular one.
Can’t knock that. I of course knocked out a benchy when I first started out, but I figured I’m not much of a boat guy haha
And to solve your filament label problem, although clunky, you can use some masking tape and a sharpie
I do the cali cat at half size (because I have no patience). They look cute and you get a performance review for the filament as well as color.
They are cute! Seeing people even making shelves for them lol. Didn’t know this was a thing
Those are the worst looking d20s I’ve ever seen.
;-)
Doing the same with almost all my filaments. I picked the Cali-Dragon model since it also somewhat benchmarks the filament and printers. Basically a nicer Benchy
I always print a low poly cat I found years ago on thingiverse, you can see it on this timelapse video, there are also a handful of the other ones I’ve printed at the end.
Here is an alternative Piped link(s): https://piped.video/shorts/H6hkkoc8W1U
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
I use benchy for it!
Benchy also verifies your print settings are correct. Not as great as a temp tower/retraction test, but decent at detecting major setting problems
That’s pretty good-looking too. And may I ask which filament your Mac-n-cheese colored one is? (Maybe it’s just the lighting - doesn’t look true orange)
It’s a janbex pla orange filament. And yeah, it’s a little lighter orange and not a too intense orange.
Can’t you just look at the spool?
Some filaments look much different when printed than they look on the spool. Matte, shiny, multi-colored ones for example.
Not when I run out in the future! I also found out that the silk gold I’m using definitely printed different/shinier than I was expecting, based on the spool filament.
Yes.
Seems like the ones that find it necessary to print color references are either using fancier materials or use a ton of different colors.
Yes, with https://www.printables.com/model/272073-dachshund-low-poly (printed at 50% scale)
I like the gold one, in the back. Can I see a close up of It? It’s really pretty.
Sure! My gold came out really nice. As a bonus, I also tried printing one of the amogus ghosts in good, and it’s probably the nicest print I’ve had yet. Can’t even see the layer lines!
That’s crazy pretty!! Thanks!
