• MrMonkey@lemm.ee
    link
    fedilink
    English
    arrow-up
    91
    arrow-down
    1
    ·
    1 year ago

    Works the same as M-b for me (backwards-word)

    Make sure your /etc/inputrc or ~/.inputrc contains

    # mappings for Ctrl-left-arrow and Ctrl-right-arrow for word moving
    
    "\e[1;5C": forward-word
    
    "\e[1;5D": backward-word
    
    "\e[5C": forward-word
    
    "\e[5D": backward-word
    
    "\e\e[C": forward-word
    
    "\e\e[D": backward-word`
    
    • 𝒍𝒆𝒎𝒂𝒏𝒏@lemmy.one
      link
      fedilink
      English
      arrow-up
      24
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Lemmy:

      > meme with problem

      > SolutionCommentMemeCommentCommentMemeQuestion

      Others:

      > meme with problem

      > BotCommentCommentAwardsAwardsBotShitpostAwardsShitpost

      I hope the formatting shows properly… And thanks for this 😁 now to update the .inputrc on my laptop and VPSes

      Edit: fix typo and formatting

      • deejay4am@lemmy.world
        link
        fedilink
        English
        arrow-up
        6
        ·
        1 year ago

        It would have been funnier if you put in “\e;D5c1-7” or whatever the fuck VT-100 gobbledegook

      • angrymouse@lemmy.world
        link
        fedilink
        English
        arrow-up
        18
        ·
        edit-2
        1 year ago

        Idk if you know but you van actually save a post or comment pressing the button “save” under it. It will appear in your profile in a section of saved stuff.

  • abraham_linksys@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    83
    ·
    edit-2
    1 year ago

    Ctrl+a - go to beginning of line (alpha? I dunno)

    ctrl+e - go to (e)nd of the line

    alt+f - (f)orward one word

    alt+b - (b)ack one word

    You might already know these but no one else has posted them on this thread yet. I work in both Linux and Mac a lot and this works for them. No idea about Windows I’m no longer forced to use it at work 🙂

      • debil@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        No (although you can easily create such a key mapping if so inclined). To type b character one must first enter the so called Insert mode. Depending on where exactly you wish to type the character, you can enter the Insert mode by typing for example i, a, I, A, o or O.

        • Nailbar@sopuli.xyz
          link
          fedilink
          English
          arrow-up
          5
          ·
          1 year ago

          It wasn’t a serious question 🙂

          Sounds like you’re talking about good old vi or vim.

    • SokathHisEyesOpen@lemmy.ml
      link
      fedilink
      English
      arrow-up
      29
      ·
      edit-2
      1 year ago

      Because fuck you! That’s why!

      Edit: serious answer, I’m pretty sure it’s outputting the key events to the terminal line.

    • gornius@lemmy.world
      link
      fedilink
      English
      arrow-up
      26
      ·
      1 year ago

      Because terminal emulators are literally the old terminal emulators (ye oldy screens + keyboard combos that looked like a computer but were just IO) and everything modern they do is just a hack.

      • grue@lemmy.world
        link
        fedilink
        English
        arrow-up
        17
        ·
        edit-2
        1 year ago

        Terminals with screens? What’s all that newfangled shit?

        Nah, whippersnapper, this tech goes all the way back to teletypes. You didn’t get a fancy-shmancy “screen;” instead, it printed out the results of your commands. On actual paper!


        Seriously though, that’s why the device files for terminals in Linux are named tty[$NUM] – “tty” is shorthand for “TeleTYpe.”

        I believe it’s also why really primitive programs can’t scroll up and do things like writing an entire screen worth of content in order to emulate interactivity (as opposed to seeking the cursor backwards and replacing only the parts the program wants to replace): they’re using a version of the control protocol so primitive that it didn’t have a function to go backwards because teletypes didn’t need it due to physical impossibility. (That’s my theory, anyway – I haven’t dug deep enough into the guts of TERMCAP etc. to be sure. I’m also not actually old enough to have experienced that stuff, despite my joke above.)


        Edit: look at this excerpt from man terminfo(5), for instance:

        Basic Capabilities
        The number of columns on each line for the terminal is given by
        the cols numeric capability.  If the terminal is a CRT, then the
        number of lines on the screen is given by the lines capability.
        If the terminal wraps around to the beginning of the next line
        when it reaches the right margin, then it should have the am
        capability.  If the terminal can clear its screen, leaving the
        cursor in the home position, then this is given by the clear
        string capability.  If the terminal overstrikes (rather than
        clearing a position when a character is struck over) then it
        should have the os capability.  If the terminal is a printing
        terminal, with no soft copy unit, give it both hc and os.
        

        To this day, the info database entry for your virtual terminal has to specify that it’s capable of deleting a line of text instead of merely striking it out, because some terminals back in the day actually couldn’t!

  • nayminlwin@lemmy.ml
    link
    fedilink
    English
    arrow-up
    22
    ·
    1 year ago

    What happens to me is the opposite. I got used to Ctrl+w to delete a word in terminal and accidentally closed browser tabs many times while typing in them.

  • TimeIntegrated@lemmy.world
    link
    fedilink
    English
    arrow-up
    22
    ·
    1 year ago

    I didn’t even know I can Ctrl + arrow keys to move from word to word and I have been using computers for over 20 years …

  • Jordan Lund@lemmy.one
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    3
    ·
    1 year ago

    In any sane editor:

    Save a file - CRTL-S

    In VI:

    1. Switch to command mode by pressing the Esc key.

    2. Type : (colon). This will open the prompt bar in the bottom left corner of the window.

    3. Type w after the colon and hit Enter.

    In Emacs:

    https://www.gnu.org/software/emacs/manual/html_node/emacs/Save-Commands.html

    C-x C-s Save the current buffer to its file (save-buffer).

    C-x s Save any or all buffers to their files (save-some-buffers).

    M-~ Forget that the current buffer has been changed (not-modified). With prefix argument (C-u), mark the current buffer as changed.

    C-x C-w Save the current buffer with a specified file name (write-file).

    M-x set-visited-file-name Change the file name under which the current buffer will be saved.

    When you wish to save the file and make your changes permanent, type C-x C-s (save-buffer). After saving is finished, C-x C-s displays a message like this:

    Wrote /u/rms/gnu/gnu.tasks

    If the current buffer is not modified (no changes have been made in it since the buffer was created or last saved), saving is not really done, because it would have no effect. Instead, C-x C-s displays a message like this in the echo area:

    (No changes need to be saved) With a prefix argument, C-u C-x C-s, Emacs also marks the buffer to be backed up when the next save is done. See Backup Files.

    The command C-x s (save-some-buffers) offers to save any or all modified buffers. It asks you what to do with each buffer. The possible responses are analogous to those of query-replace:

    y SPC Save this buffer and ask about the rest of the buffers.

    n DEL Don’t save this buffer, but ask about the rest of the buffers.

    ! Save this buffer and all the rest with no more questions.

    q RET Terminate save-some-buffers without any more saving.

    . Save this buffer, then exit save-some-buffers without even asking about other buffers.

    C-r View the buffer that you are currently being asked about. When you exit View mode, you get back to save-some-buffers, which asks the question again.

    C-f Exit save-some-buffers and visit the buffer that you are currently being asked about.

    d Diff the buffer against its corresponding file, so you can see what changes you would be saving. This calls the command diff-buffer-with-file (see Comparing Files).

    C-h Display a help message about these options.

    • TWeaK@lemm.ee
      link
      fedilink
      English
      arrow-up
      13
      ·
      1 year ago

      More often it’s Ctrl + backspace that doesn’t work. Ctrl + <- works nearly everywhere.

        • TWeaK@lemm.ee
          link
          fedilink
          English
          arrow-up
          5
          ·
          edit-2
          1 year ago

          I hope you don’t expect that to convince me to upgrade. That doesn’t even make up for what they did to the taskbar.

          • Kryomaani@sopuli.xyz
            link
            fedilink
            English
            arrow-up
            2
            ·
            edit-2
            1 year ago

            They’ve since updated it to allow you to display labels & not condense multiple windows into one button so it’s better than ever. I can’t believe it took until 11 to center the items, left aligning was a literal pain in the neck especially on ultrawide screens.

            • TWeaK@lemm.ee
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I prefer the left alignment, but I’m glad to hear they finally fixed the combined button thing. I still won’t stand for the right click menus and general fuckery with settings pages and keyboard shortcuts.

  • sophs@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 year ago

    Idk about bash but at least in fish I can do alt + arrows to move the cursor by word, also alt + backspace works to delete whole words.