. . .
The limits of human adaptability
Scientists and other observers have become alarmed about the increasing frequency of extreme heat paired with high humidity.
In the Middle East, Asaluyeh, Iran, recorded an extremely dangerous maximum wet-bulb temperature of 92.7 F (33.7 C) on July 16, 2023 – above our measured upper limit of human adaptability to humid heat. India and Pakistan have both come close, as well.
People often point to a study published in 2010 that theorized that a wet-bulb temperature of 95 F (35 C) – equal to a temperature of 95 F at 100% humidity, or 115 F at 50% humidity – would be the upper limit of safety, beyond which the human body can no longer cool itself by evaporating sweat from the surface of the body to maintain a stable body core temperature.
It was not until recently that this limit was tested on humans in laboratory settings. The results of these tests show an even greater cause for concern.
. . .
The issue is that in general, dehumidification is energy intensive, just as cooling is. In fact, one of the best ways to dehumidify air is to cool it down. Other non-mechanical solutions, like chemical solutions (e.g., dry hygroscopic material with large surface area) don’t have an energy cost during their use, but they have an energy cost in their production and renewal. For example, to dry the hygroscopic material back out to recycle it and re-use it, you must supply a lot of heat energy.
I would be interested in an energy consumption comparison though, between: cooling air to keep it under the red area of the curve; dehumidifying air to keep it under the red area of the curve; and some combination of the two (as most air conditioning units do). It may be the case that dehumidifying is less energy intensive.