Hello all! I have an amazing modded GBA that I purchased through an eBay builder who was wonderfully communicative and built my console exactly how I wanted it.

Unfortunately, I’ve found myself displeased with one specific feature: the DPad. It takes a great deal of force to move diagonally in any game I play. I truthfully don’t recall this being an issue with my old OEM unit that I enjoyed in highschool. I added some cardstock as a makeshift spacer based on some recommendations I’ve found online, and that improved it only marginally.

Has anyone else out there encountered this issue? If so, do you have any advice?

My initial research suggests the aftermarket membrane for the DPad is the culprit. I’ve cleaned the contacts on the motherboard so I believe that can’t be the problem. If membrane conductivity is the issue, then I don’t know what brand to replace it with. Seems like every thing on the market is built by the same manufacturers?

Any advice you guys can offer would be appreciated!

  • nugget359@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    5 months ago

    So I had this problem on my modded GBA, my solution was to ever so slightly loosen the screws on the dpad side of the shell. Turned out I was over tightening them

    • Jim_Just_Jim@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      5 months ago

      Thanks for the advice. I gave that a try and it seems to have helped a little. Maybe I just need to grow a stronger thumb lol.

      • nugget359@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 months ago

        If you’re feeling confident to open it up you could try loosening the screws a little that hold the board to the shell on the Dpad side too. I’ve had to open mine quite a bit to get it right lol