How to install ProtonVPN in Arch Linux (CachyOS) ?

Should I follow https://wiki.archlinux.org/title/ProtonVPN ?

OR

from flathub https://flathub.org/apps/com.protonvpn.www ?

This flatpak has Unverified tag, but according to this, this flatpak is safe.

Which one should I follow ?

Asking this because I’m because I’m a bit lazy to configure OpenVPN and all that stuff. (pls don’t kill me :)

Also do you think using VPN from flatpak is a good idea?

  • Mechanize@feddit.it
    link
    fedilink
    arrow-up
    8
    ·
    2 months ago

    I can attest that this AUR package, which is the one indicated in the wiki, works fine on EndeavourOS, but I had to add the gnome key wallet (IIRC) to handle the VPN keys. I think that was fixed.

    I have no experience with CachyOS.

      • Mechanize@feddit.it
        link
        fedilink
        arrow-up
        2
        ·
        2 months ago

        Reading rorschac’s comment I assume both OpenSSL and wireguard are already installed on CachyOS, or anyway pulled by the aur package.

        If you want to make sure you can install them explicitly before protonvpn:

        paru openvpn wireguard-tools
        

        or using yay or the vanilla pacman -Syu --needed openvpn wireguard-tools (it will sync and update the system too) or how it is suggested for CachyOS to install packages. I repeat I’ve no direct experience with that one.

        If you are scared to mess things up you can always spin up a VM with CachyOS and try to install it inside that. If it all works you can then do the same on your main OS.

        As a general advice, only run in your shell commands that you are sure about.

        • gpstarman@lemmy.todayOP
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          2 months ago

          Thank you.

          If you are scared to mess things up you can always spin up a VM with CachyOS and try to install it inside that

          That’s what I’m gonna do. Since I’m very new to Arch (used mint before), I don’t even know the difference between paru and yay.😅

          I assume both OpenSSL and wireguard are already installed on CachyOS

          So On regular Arch Linux, Step 1.1, 1.2, 1.3 all should followed as mentioned in wiki. Also in wiki they didn’t mention anything about OpenSSL?

          • Mechanize@feddit.it
            link
            fedilink
            arrow-up
            2
            ·
            2 months ago

            Also in wiki they didn’t mention anything about OpenSSL?

            Sorry, that was my bad, I wrote OpenSSL instead of openvpn. That one is probably needed too, but you should not have to pull it manually.

            Generally speaking the ArchWiki is one of the best, more structured and well maintained source of information about Linux things even for other distros, but it can too be outdated, so you should always check if the info is valid. In this case it seems so.

            In theory you should be able to just install proton-vpn-gtk-app using one of the many AUR helpers and it should Just Work™. Paru and yay are the most commonly used ones - as far as I know - and they wrap around pacman too, so you can use them to do everything packages related. Usually Arch related distro use one of them, for example EndeavourOS have yay already installed.

            At worst when you try to start protonvpn the GUI will not appear or immediately crash: if that happens, usually, you can try and run the program from the Shell and see what kind of error it returns and work your way from there. Checking if the deps listed in the wiki are installed is always a great first step.

            • gpstarman@lemmy.todayOP
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              2 months ago

              Thank you for the detailed reply.

              using one of the many AUR helpers

              So, I can’t install aur packages via pacman?

              Just Work™

              Also Are you quoting certain nExT gEn gAmE guy?

              • Mechanize@feddit.it
                link
                fedilink
                arrow-up
                2
                ·
                2 months ago

                So, I can’t install aur packages via pacman?

                Nope, you have to do it manually or using an helper that abstracts the manual work away.

                AUR packages, or to be more precise the PKGBUILD files, are recipes to compile or download stuff outside from the official repositories, manage their deps and installing them on the system.

                You should always only run PKGBUILD files that you trust, they can do basically anything on your system. Checking the comments of the package in the aur repo is a good practice too.

                Also Are you quoting certain nExT gEn gAmE guy?

                …maybe

  • Nine@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    2 months ago

    You could also just grab a wire guard configuration and use it too. They provide them along side the openvpn configs

    • Telodzrum@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      2 months ago

      This is what I do. I can control it through nm-applet and have Proton, PIA, and my work VPN all set up as profiles.

          • gpstarman@lemmy.todayOP
            link
            fedilink
            arrow-up
            1
            ·
            2 months ago

            I just use whichever server has less load.

            I don’t know if the OpenVPN profiles are synonymous to the list of VPN Servers i.e. a single profile means a single server. If that’s the case I need all of the profiles right? to select whichever one has less load?

            • Telodzrum@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              2 months ago

              I use a single profile per server, but I only have added those with low latency and a few others with desirable geographic locations. The bulk of servers offer neither, so I don’t bother including them. Do you know what the total number of unique servers you’ve used over say the past 30 days is? You may need fewer profiles than you think.

    • gpstarman@lemmy.todayOP
      link
      fedilink
      arrow-up
      1
      ·
      2 months ago

      Thank you. It’s just that I prefer more of a GUI way. (Doesn’t mean I hate terminal or anything)

  • rorschah@lemdro.id
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 months ago

    I personally use the proton-vpn-gtk-app from AUR ( the 1.3 section from wiki ). And in cachyOS, i only had to do

    paru -S proton-vpn-gtk-app
    
    • Veraxis@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      +1 in favor of using proton-vpn-gtk-app. That’s what I use.

      I use yay with regular Arch, but any AUR helper on CachyOS should be the same thing.

        • Veraxis@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          2 months ago

          Because either AUR helper is going to be pulling from the same AUR repository. Whether you use yay or paru, it is fetching the same files from the AUR. I am sure there are minor differences between the various AUR helpers, but all that I mean to say is that for your purposes it is probably not critical and you should use whichever AUR helper you prefer.

  • AnomanderRake@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 months ago

    I spent hours trying to set up the GUI and couldn’t get it to work. Tried the AUR, Flatpack etc and no luck. In the end I just set up the command line version of open VPN with an Alias.

    • Kongar@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 months ago

      I’ve been running proton in arch for a while now - both aur and flatpak, as well as the new flatpak mentioned.

      I found in some obscure reddit post the solution to what I think is a lot of people’s issues.

      I need to install network-manager-applet every time. As soon as I do, proton vpn works just fine. This is on gnome.

        • gpstarman@lemmy.todayOP
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          2 months ago

          I guess by doing this way we can’t tell which server has less load just by looking it, right?

          • Shatpoz1288@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            2 months ago

            Yeah and, for example, I believe the ios app switches to less busy servers automatically by default.

            It’s got its downsides but I’m willing to live with this cuz im a bit paranoid and don’t wanna use non-official flatpaks 😂

            • gpstarman@lemmy.todayOP
              link
              fedilink
              arrow-up
              2
              ·
              2 months ago

              im a bit paranoid and don’t wanna use non-official flatpaks

              Makes sense, especially for something as important as VPN.

              Thank you.