Are you using subtitle sync in bazarr? I don’t use jellyfin, but have found that bazarr has fixed most of my subtitles that were not in sync just by enabling the option. I think it’s CPU intensive though, so don’t do the whole library at once.

I love my Yubikey but the older hardware versions can only store 25 passkeys, and I believe even the newer ones can only store 100. That seems like a lot until more sites start allowing passkey auth.

they can’t be that bougie, every apartment I’ve ever been in with a sliding door has those, and usually somewhere from 1 to 5 of the slats have broken off from normal operation

You could also swipe down on the reader to bring down the notification tray, I miss that fingerprint reader every day.

I couldn’t remember what one that was, thank you. I knew it wasn’t kids book bit thats one of the things I still say all the time

Strongbad email maybe from a female.

My favorite is Kids’ Book. “Some people are very tall and merciless, Quincy is destroying San Antonio.”

Did you change the native VLAN to IoT or just added the tag and left the native VLAN on the switch port set to default? You should be able to change the native VLAN and leave tagged VLANs as “allow all”.

My only other thought is how did you isolate the IoT network and are you able to access other devices from default to IoT?

deleted by creator

I’ve had it running for a few months, I don’t use it that often but it’s been super handy when I need it.

Development has been going crazy for the last year or so. I don’t regret a single cent I’ve paid for the nabu casa cloud subscription (not many subs I can say that about). I do, however, regret that I only have so much money to spend on new things to attach TO home assistant and start automating.

I started just with a 2 bay nas that I had a few VMs on… then it spiraled. Back with PIs were cheap it was fun to spin up new stuff all the time. Now an N100 mini-pc is way more cost effective long term, plus you get to start dipping into VMs, LXC, docker, etc.

Not to mention Home Assistant is an entire hobby in itself. 4 more aqara devices just came for me today.

I do feel like I should second the comment that it isn’t cheap, but you can do things in bits and pieces that don’t make it feel like you’re spending your life savings.

No, but you CAN use HA timers in NodeRED. You just have to trigger off the state of the timer itself. I did get it to work but it was quite a bit of spaghetti, I found it easier to use eventID triggers in the standard automation GUI for dealing with persistent timers.

Mobile Device Manager, used for protecting/locking down devices.

The zigbee bulbs I’ve had the best luck with are Innr, although they are kind of pricy. Ikea bulbs are good for the price, but every one I have, has very loud coil whine when off. I had some on bedside stands and had to move them to other rooms. Sengled are nice when they work, I’ve had issues with them dropping off my network.

Both Ikea and Innr are also repeaters, Sengled does not do repeaters in their bulbs. Neither Ikea or Innr are exactly cheap, but they’ve been the most solid for me.

I did this as well, I still have 2 pihole instances running with gravitysync for now, but AGH sync is much easier to setup and maintain. My 2 pihole instances are running for my guest network only and AGH is running everything else.

I ran HA on mine for a while before I moved it to a VM. Right now I’m using my Pi as a secondary wireguard VPN in case my primary is down for some reason.

Also, quick tip, I found that ikea zigbee bulbs work really well but have really bad coil whine when off, don’t use them for bedside lighting.

This is likely a marketing video. Fliplanthropy is the name of their show that they are selling to HGTV in The Curse.

This was my first thought as well. This isn’t a replacement for portainer agents on mulitple docker hosts, hopefully that’s something that is doable in the future.

I’m not sure if this post was /s or not, but ViewTube is actually pretty easy to self host if you have a docker host in your current environment. They even provide a docker compose example on the wiki.

Piped is so slow for me, I’m not sure if it’s a me issue or a host issue. I finally spun up viewtube to test it out since running my own piped instance seemed cumbersome.