These are the desiccant containers I am printing now, in PETG. Less pretty, but I think they are more functional.

https://www.printables.com/model/50375-desiccant-silica-hygrometer-spool-container-modula

Ok So I now have the 3d printer up and working. ( yeah, slow for obvious reasons )

Pics below.

Basically, I’m printing stuff for the printer to gain skills. PVA to start, I printed a Bowden tube adapter. Mainly so I can run filament directly from the dryer when using hygroscopic stuff. https://www.printables.com/model/983043-elegoo-neptune-4-pro-bowden-tube-spool-holder-moun

Also, printer a few of these desiccant holders. But in PLA they seem to shatter easy when tightening the lid. So I’m printing another design in PETG ATM

I need to add a vent to the tent pefore trying to play with Nylon. So thats my next task. Just need to workout something.

Darktable

Desiccant is used a lot in boats. ( in the uk at least where damp is an issue )

But is a different way to 3d printers. It’s more about directing condensation.

My thought is to build desiccant holders to mount near the boat windows. (not sure your location if you dont know narrowboat, So ill describe the issue)

My boat was built in the 1970s so is currently single glazed. We plan to do a complete rebuild of the inside and the glazing. But poor again so time.

This design tends to mean condensation builds up hugely on the windows. As the whole design of a steel boat leads to temp differences and the UK has high humidity. More so at water level of course.

The issue is the condensation then runs down from the windows along the wooden panels inside the boat. Doing huge damage over the years. One of the big reason owning a boat is costly. There is constant maintainance and replacement work. Im good at the electrics. But my younger brother dose most of the woodwork.

A common solution is to have a desiccant container with a water catcher below it positioned near the windows. This effectively absorbs some of the humidity before in condensates on the windows. Then, as the Desiccant overloads, releases it into the catcher.

You then need to empty the catcher and replace/dry the desiccant often. And honestly, it still just reduces the issue.

You can buy holders to do his. Sold for boats and caravans etc. But honestly they tend to be a bit universal, so not actually very usable.

Part of me thinks I can design a 3 part system that can be mounted. Have a drip pipe leading directly to the bilge rather than running down the walls. Then have slot in desiccant units that can be carried home and back and microwaved as we swap over.

well, ill have the printer together tonight. Will likly print some petg experiments tonight/tomorrow. The some cable chains etc to get practice.

Sorta inpressed you remembered my dull questions at all.

Some corrections.

The boat and the workshop are separate. My brother and I share a 25ft x 6ft10inch narrowboat. We tend to travel over spring and summer swapping over as we move it around the UK.

The tiny area I scanned (not well) was the engine room as it is under tge rear deck so low down small and cannot like many boats be opened from the top.

Hence the need to measure things to layout access.

The workshop is in my 2 bed home. So less crowded.

It is cool that you remember the stuff. When the boat is done I’ll def share pics. But my mobility and costs mean its likely to be a year or 2 before all is done.

Most of the stuff is together. (obtained wise) Mounting etc is a big part of the 3d printer. But likely after the engine room.

The smaller pie is planned to manage the solar dump. along with a diesal air to water heater (Bobil Van) Linked in but only temp shut off via the pie.

All the mounting etc comes after the bilge and engin electronics.

Likely early 26 for finisjh given our mobility. (edit: and poverty, that’s the bit that takes longest:)

Thanks for remembering

Lol

I’ll go hide my shame

Honestly, If it is ever made to work. A mobile/robotic 3d printer would be a huge step forward. Solving the issue of levelling on more random surfaces, IE all existing surfaces. Plus the Issue of moving heat stability with different plastics. It all sounds doable in an open design way. But hugely complex and in need of this type of nutcase to start it off.

But the advantages it would give to home-maker like design would be freaking huge once things become well understood. Adding already developing multi mateial heads etc.

As I have said elsewhere. Never underestimate the value of someone insane enough to try and make dumb shit work. Almost everything we depend on started from someone thinking the most insane idea would be fun to try.

I’m going to assume you decided the extra weight may improve vacuuming in some limited situation.

But thanks for leaving the correction to make me wonder for a while. Made your comment almost enjoyable.

Yeah im not an apple fan. (My brother would have a heart attack if I didnt say that. He loves them).

But the fact they controll both hardware and software means they can run on lower specs. They dont use it as well as they could. But android having to allow others to develop hardware. Provides a bit more ability for manufactures to implement less efficient drivers. This is why some higher spec low value stuff seems so slow compared to equal speced cheaper Samsung stuff etc.

Well nowadays yes. But when the term smartphone was invented. Really not.

The 1st iPhone was way lower spec then many high end phones of the time. Mainly Nokia but others as well.

Early androids and others def had no specific specs that differed them from other high-end phones such as Symbian Win CE (as crap as the OS was but then so was the smartphone mareted version recreated later on)

Seriously, marketing was the only thing that differed them from phones like the N95 and communicator etc etc.

And as I mentioned, the locked store front. That really seem to be the main difference but really I still find non-advantageous myself.

been a long while so my memory is likely flawed.

But I’m sure I remember someone getting doom running on a 95 in the 2000s some time.

Had one for a good few years. Moved from US back home to UK with it so lasted a good while.

Loved the thing. Hated when I had to give it up due to lack of support for newer software.

I still find it bloody hard to see how modern smartphone are technically different. When you consider early some android etc had keyboards etc. Basically, it’s just marketing and a more locked in app/program store.

Thats easy.

Some folks are insane.

And thank fuck for them. Doing dumb stuff like this has led to so much of the useful stuff we see and use now.

“Can I make this dumb idea work” is the very source of inspiration behind science. Never underestimate its value.

–

My relative sanity can be so disapointing to me ;)

High use Blender users tend to avoid AMD for the reasons you point out.

This leads to less updates due to amd users not being to interested in the community.

It is an issuw without any practicle solution. Because as I need a long overdue update. Again nvidia seems the only real choice.

Everyone is sorta forced to do that unless we can convince amd users to just try out blender and submit results.

So hi any AMD users who dont care about blender.

Give it a try and submit performance data please.

Seriosly the freedom of women in Afghanistan is a seriose issue. As it is in many places.

But Cats seems to be a very very bad example. Most of the world. With the exception of a few owners that keep them indoors.

They are the pet with the most freedom. More so then any human.

Unless she is specifically considering the female feline mating experience.

Yeah looks very much like nvidia is exclusive at the top even at the price I’m looking at.

The RTX4060 looks about right price vs performance. I’ll spend some time looking up how well they play with linux atm. And keep an eye out for a used RTX4070 as well.

If no one minds my hyjacking part of this thread.

Id also like some similar advice.

I use blender. Not heavily but have been playing on it for 20plus years.

My GPU is pretty old. 1050ti at the time nvidia was pretty much it for blender.

Im looking for a sub £300 card in the next 3 to 6 months.

Is AMD well supported by blender now. And what cards would folks recomend these days.

PS not a gamer. 0ad is about as close as i get.