Mellow

Just being born in some geographical location doesn’t make you a decendant of their people. You are a decendant of where your ancestors are from. If your family doesn’t celebrate their heritage then pick the one that best describes where they come from. Maybe sit down and ask your parents or grand parents some questions about your ancestry so you can come to an identity based on facts.

Fuck Kotaku, and fuck Alyssa Mercante. It was not nice knowing you. Thank you for the good news.

Should we report them for attempting commit fraud for posing as an official complaint office?

“Everyone but me is a moron” is the mark of the moron.

I’ve heard it phrased: “If you’re surrounded by assholes. Maybe you’re the asshole.”

She has not gone out of her way to criticize Trump, and has instead treated both Trump and Harris as being equally bad…

I’m sold.

But people in the original Lemmy thread told me it was the Klan! The op, “Buttflapper” reports: “They were filming and had fake county employee badges, immediately trespassed and removed”. Surely they didn’t jump to conclusions and were wrong!

My guy early voting down in GA.

I’m a pessimist.

I think it would be ‘overstating’ deepening on which side of the fence you sit. Microprose can’t possibly be the same team members they were 20-40 years ago. If you are nostalgic for a game you played as a child then maybe be a little guarded for what a completely different group does with the IP.

I experienced Timeshift with LMDE about 2 or 3 years ago. (Linux Mint Debian Edition) when I heard about it I immediately re-installed using BTRFS to try it out. I gotta say snapshot backups are very fast. It really surprised me. I tried out some config changes and restores and it went very smoothly. If you can leverage Timeshift in grub then I need to watch the video and set that up asap. Nothing more annoying than trying to diagnose a failed boot or giving up and reverting to a previous kernel. (Spoiler: It’s always nvidia kernel modules)

The best upgrade I made for the Ender 3 for adhesion was a PEI coated build plate. I don’t know the specs of the V2, but the brand I went with was “Wham Bam Systems” mine didn’t have a magnetic bed so I had to purchase the kit with the magnetic plate, and stainless steel PEI coated build surface. It was nice being able to pull off the plate and pop prints off of it. Be careful printing PETG on PEI it can fuse to the PEI

If the V2 has some sort of leveling system make sure it’s working correctly or the PEI sheet isn’t really going to help. Mine did not. I had so many failures where the print head crashed into the sheet and gouged it. The Z end stop wasn’t the best. I added a BLTouch probe and flashed the firmware and it got much better.

Creality is good because they brought an entry level 3d printer to market for an affordable price, and people like me got into the hobby because of that. The price point shows in the parts they use to assemble it. I’ve clocked countless hours learning how to correct failures, and upgrade the cheap parts for better, more reliable parts, add features, modify and flash firmware.

Five and a half years ago I bought that ender 3 pro. I think it was around $250 USD. I probably spent over $300 more upgrading it and replacing parts. In retrospect I shouldn’t have cheaped out, but that’s the conclusion I came to. I no longer want to waste time fixing the printer. If I walk away and don’t print anything for weeks/months at a time I’d like to have confidence when I fire it up it’s going to work.

I ordered a Prusa MK4S about a month ago which was the top-end hobbyist printer back then, and I am blown away by the difference. Prusa may not be the top at the moment, but the quality and support is there.

I recommend that unless you have the free time, you’re willing to tinker, and are not easily frustrated, you should look into a higher quality brand.

Yep. In the style of Trump

This cabinet is truly spectacular—one of the finest you’ll ever see. It’s got so many shelves, folks, you wouldn’t believe it. Absolutely tremendous. Each shelf is perfectly designed to showcase your prized possessions. Believe me, the craftsmanship is second to none. These shelves are not just shelves; they’re a statement. They’re big, they’re beautiful, and they hold everything perfectly. This cabinet is going to be a tremendous addition to any room—nobody does shelves like this, folks. It’s going to be huge!

Woah there. You’re using about 25% more of your brain than the rest of the internet. We’re gonna need you to tone that reasonability down a bit.

I look forward to setting up my next polyamorous network connection. I can wait for the commands nmcli con choke me daddy ens1 thrupple0

I believe there is a lot of positive reasons to have the Olympics. It’s a symbol of peace. Nations joining together in the spirit of competition to send their best athletes to compete. Culture is shared. Cities hosting it put their best foot forward. Everyone comes together.

As far as the negatives. The amount of money and work required to host is getting out of hand. They should seriously pair back the amount of competitions. I just freaking watched break dancing. Seriously? Dressage? Should we just cut to the chase and award medals to the horses? Maybe we stick to athletic human sports and drop some of the frivolity, or artistic endeavors where judges are required to decide style points when a stopwatch or a tape measure should do. The sheer amount of resources required to support this bloating competition has gotten out of hand.

Ethernet speeds historically were measured in 10/100. In my past life I worked for an a small rural isp. And part of my learning I was taught that cat5 was 8 strands of wire, or 4 twisted pairs. I got very familiar with crimping patch cables. If one strand were cut a network card would negotiate down to its lowest speed and still work at 10mbps. Operating on 4 wire or two pairs. It’s possible with those numbers you had a bad connection, or a broken strand in the cable and it auto negotiated down to 10mbps. To this day I still crimp my own cables, and I own a cheap cable tester to make sure the crimps and cables are good.

I’ve had very bad luck with raspberry Pi’s and SDCards. They just don’t seem to last very long. I swapped to usb storage and things got somewhat better. I just had a usb drive die after 3 to 4 years of use. When I was still using SD it seemed like multiple times a year. Heat. Power loss, you can only punch holes in silicon so many times before it wears out. Whatever the reason.

My approach for this is configuration backup not the entire os. I think this approach is better for when it’s time to upgrade the os or migrate to a new system.

For my basic Pi running WireGuard and DNS, I keep an archive of documentation on steps to reconfigure the system after a total loss. Static configs are backed up once, and If there are critical configuration items that change then I back those up weekly. I’ve got two systems (media related servers, not Pi’s) that I keep ansible playbooks to configure 90% of the system from scratch so it’s as hands off as it can be.

Assuming the boot partition is still there and mounted. Just empty. If it were me I would try to reinstall grub2 and kernel packages. I don’t know what errors I would encounter trying it, so that would be the next hurdle.

Old I.T. Proverb: Documentation is like sex. Even bad documentation is better than no documentation at all.

The Democrats are out of time, and they could rush to nominate her as their candidate in August. It’s likely they will find the best polling candidate, and I hope they look for someone outside the Biden/Harris administration. Someone without the baggage of the last four years and complicit in hiding the condition of the current president.

Personally I hope they ask Michigan Gov. Gretchen Whitmer to lead. (If she will accept) Of all the possible nominees I’ve read about she has the most experience.

deleted by creator