I’ve used wi-fi calling fairly extensively mostly because I’ve lived in areas where there was zero cell service but ready access to internet (via Starlink or other wireless forms of it). One thing I do know is that my phone co. requests that I fill out a form specifying where I am living currently (whilst using it) so that if I ever need to contact emergency services they’ll have a better idea of where to route the call to. For instance my phone number originates from Western BC but I could potentially be using wi-fi calling from anywhere in the province. I mention this to say, it appears my telco doesn’t have a way to triangulate me with this service.

I can further attest that wi-fi call & text reception still works fine when I have a VPN running on the router that my mobile device is connecting to. Make of that information what you wish.

Though that I have read that wi-fi calling is atrocious for privacy reasons that I have not followed up on. Given the above I’m not sure how or why that would be the case, but basically if I’m in an area with cell coverage I turn it off. I’ve always meant to look deeper into how or why it might be bad (or worse) in some way.

Localsend has a config named ‘auto-accept’ or whatever it’s called, in advanced settings.

Jaimie Johnson who filmed the documentary Born Rich (and its sequel) pissed off enough of his family and peers that he was almost thrown out of high society for exposing its underbelly. He also lives a pretty normal life echewing his family fortune which is pretty dope. Might be along the lines of what you’re looking for. Good films either way.

ETA check out The One Percent as well, his follow-up from the first film.

Granted, you’re using a home setup. But you could still consider setting up the VPN on a central AP and repeating your hotspot through it to make everything going in and out of your network encrypted and more secure. None of your actual traffic (besides what your phone is emitting) will be in the clear, which is better than nothing.

Almost any router with VPN and repeater options will accomplish this if you don’t wanna root your phone. I’ve flashed OpenWRT on the equivalent of router potatoes over the years. It’s pretty straightforward.

Yeah sorry I don’t have experience with Graphene but a quick search seems to say root is very difficult with it. Maybe look into flashing a different custom ROM if you really need this.

One thing I’ve done quite a bit is use my travel router (I have a GL-Inet Slate but there are lots of options) to repeat my hotspot, then connect all my devices via the router. And set the VPN up on the router. This way everything going out over the hotspot is encrypted anyhow.

For my needs, I can power the Slate by plugging it into my laptop or even my phone via usb-c. It’s very portable and versatile. Ymmv.

You can (basically) only do this with a rooted phone. There are some permissions issues that prevent the hotspot network adapter from being shared over the VPN client otherwise. This article from Proton is just an ELI5 splainer, you can go deeper with some searches.

If you have root and/or a custom ROM already (which usually assumes root) it’s not that complicated.

Ed’s got a podcast called Better Offline as well.

Right. We all know Steam Deck is running on Arch. And also that Steam previously did publicly release SteamOS for awhile (Debian based). So hopefully one day soon they get ballsy enough to push a new/modern official linux build and profit. They haven’t even taken the old links to the SteamOS builds down. I mean c’mon!

Admit to not reading the whole article but does this mean they’re finally going to officially release SteamOS 3 for desktops? Or am I stuck with hacky ports from the Steam Deck?

Well you’re kinda right. I’ve lived in BC and the Yukon where it’s fully legal for women to go topless and I know quite a few who have, for shorter events like naked bike ride etc. But most of them intelligently choose not to at public beaches and whatnot because of the ick factor.

I know one lady who did choose to go topless on a hot summer day in a fairly major downtown center and was accosted by cops whom she had to argue with (gladly, and loudly) for over an hour to explain to them that she was breaking no laws. They were trying to pressure her to re-robe because they were getting complaints, but again it’s true that she was breaking no laws at all. They couldn’t in the end do anything about it, and rightly so.

NP! It’s a great app, the dev updates it really frequently and I’ve never had any functional issue with it. I keep meaning to drop onto their git issues board and make a couple of small quality of life suggestions for the UI/UX as I use it dozens of times per day for work (there are some processes that currently take 5 clicks/per that could be reduced to 1 or 2 max) but that is a very small and nice problem to have.

There are quite a few high profile (in the media anyhow) cases where nutjobs get off on starting fires, yeah. But the really dark shit starts to happen when (ahem) alternative media sources start to imply that all arsonists are paid state actors and/or sexually aroused political players doing all the arson.

It’s usually insurance-related. Or accidental. Nothing that sexy in the vast majority of them.

My favorite was last year during the very real wildfire issues affecting western canada where the flat-earthers kept posting video of actual forestry worker helicopters torching brush piles (something they actually do, during the off-season, to clean up tinder piles) and conflating it with “treaudeauh-paid ANTIFA super-soldiers out to bring in 15 minute cities and permanent state control by burning society to the ground” or whatever the hell. The absurdity of it all kinda turned me on in the other direction, ngl.

That was the same issue I had with SyncThing, it just seemed to conk out at weird times and I gave up on it (for that purpose). It’s great for centralizing a directory of files from one machine to another but I didn’t love it for keeping a single file up-to-date with changes coming from more than one point on the network.

Oh yeah sorry, I misunderstood. I think what you’re looking for is local (network) versioning which I’ve had trouble finding in the past as well. I had hoped SyncThing would do it but it doesn’t. Versioning is something a service like git does perfectly (i.e. notifies of and/or resolves conflicts in text files on the fly, seamlessly). When I was doing a lot of writing from different devices I set up a private repo on Github (and later Gitlab) and got my text editor to auto-sync-on-save to the repo (from any device) and it worked great. There are very likely self-hosted solutions that wouldn’t rely on the cloud for that, but for me it worked fine as private repos because nobody but me would ever see those drafts (in a perfect world… we all know microsoft has almost certainly trained their shitty A.I. on my terrible writing versions over those years on Github because they own that platform).

I know there are ways to get Git working locally, probably for this purpose, but I don’t know of any simple ones to suggest.

I use LocalSend between all my devices (work, personal, etc). Mac, Linux, Android, Winblows. All. It’s fast, effective, lightweight. FOSS.

Put butter on the outside, throw it in a hot pan and grill it. Even go further and get a sandwich press. NOW YOU’RE COOKIN!

Kinda. In FP1 you can make kids work in mines and you can force your townsfolk to work extremely long hours and eat sawdust in their rations to make the food stretch longer. You can turn their heat down to save resources. Etc.

You won’t last long though haha.

When extreme climate collapse really kicks in, the average person will wish it were some protesters disrupting their commute for a few hours on a weekday vs literal breakdown of infrastructure and society indefinitely.

*years? Yes. It used to be the bleeding edge of search and now it’s just profit driven enshittification like the rest of ai-ridden garbage tech wallstreet bullshit.

You’ll find that with any major VPN. The IP addresses they use to proxy your traffic eventually get flagged and blocked by lots of major players. Which is why VPN companies cycle through them quite often. As others have said, you’ll either need to switch servers (and thus ips) or figure out another path.

I don’t use mull but most have a way to exclude a given url or site from the tunnel if you need it. i.e. the site will work for you but it’s coming from your own IP and unencrypted.