The stock software will not run in Wine. I would suggest picking hardware that’s supported by Piper.
The stock software will not run in Wine. I would suggest picking hardware that’s supported by Piper.
That’s a kernel worker for ACPI. It sounds like you may have a driver for something that is misbehaving.
I wonder what CPU it has. You should tear it down and see if you can get some custom code running.
That battery is way too small. I prefer to have a 100WH battery. It definitely needs a couple more USB ports and an SD card reader.
That’s pretty impressive, but if they can’t figure out how to mass produce them cost effectively, then it’s pointless. Most of these battery breakthroughs never make it out of the lab.
I would stick with MBR for flash drives unless you need lots of partitions. GPT is great on PCs, but usually isn’t supported on other devices.
Because modern “journalists” only know how to copy and paste from other “news sites” and random social media posts.
Good, it serves them right for the way they treat their customers. I hope every one of their games gets leaked early.
Yes, you do have to log out for group changes to take effect.
When the hard drive got full. Luckily, hard drives keep getting bigger and bigger.
The orange indicating gel is less toxic, but it’s still not good for you. Don’t dry any indicating silica gel in the same oven you use for food. The clear silica gel is non toxic, but breathing the dust can cause silicosis.
It was buggy and crashed a lot, but at least there was no telemetry.
You can get a VPN or seedbox to avoid those letters. They are a lot cheaper than a single streaming service.
Yandex is extremely useful for finding obscure stuff that doesn’t show up on the usual torrent sites.
There is a Firefox addon called ClearURLs that automatically removes all of the tracking crap. It works on PC and Android.
Pellet printing is usually used in larger printers. You can get much higher flow rates and the pellets are cheaper than filament. That’s good when your build volume is measured in cubic meters and you are using many kilograms of plastic in one print.
For 3D modeling, you can get a 3D mouse such as the SpaceMouse.
Does your windows machine have WSL? I would just write a bash script that would DD the image to the drives. Keep in mind that you will be severely bandwidth limited by the USB interface, so it will take a long time. All of the ports on the controller share the same bandwidth. Ideally you would build a PC with lots of USB controller cards for that.
I will still use it for testing things, but I will no longer use it for installing the OS on a PC I’m going to use until they get the BLOB issue sorted out.
Just use yt-dlp. It’s not hard to use. You just type yt-dlp, paste the video link, and press enter to download the highest quality version.