STL files and FreeCAD document posted on Printables: https://www.printables.com/model/741845-parametric-monitor-stand-feet
And GitHub: https://github.com/funkyfourier/monitorstandfeet/
STL files and FreeCAD document posted on Printables: https://www.printables.com/model/741845-parametric-monitor-stand-feet
And GitHub: https://github.com/funkyfourier/monitorstandfeet/
Get yourself a stepped caps lock keycap, something like this:
https://cdn.shopify.com/s/files/1/0218/4886/products/SteppedCaps_grande.jpg
Have a K3 Pro at work, and I think the K8 Pro feels a lot better, especially with the 3d printed case. Because of the reduced travel I keep bottoming out the keys on the K3 which does not feel like it is good for my hands. Also tried o-rings, but they don’t work the same way as on a normal profile keyboard.
The V-series is a lot lower, and if I knew about those from the start I’d most probably just get one of those and skip the bluetooth.
I did not, it is still in its original case. In the new case there is a holder for a cylindrical li-ion battery. Have not dared trying it yet, though, but pretty sure it will work.
It was way more work than I anticipated. Getting the measurements correct for the standoffs, daughterboard, switches etc took a lot of work and test prints to get right. OTOH I got a working prototype ready pretty fast (1-2 days) which basically just had the standoffs and the daughterboard exposed.
You might also consider doing something like this guy did: https://lemmy.world/post/2817315
Thanks! Sorry, forgot to make sure the links to the model was posted. Now they are.