If it’s attached to the wall theres probably bare metal on the bottom, and if not there’s definitely some on the inside when you open the door. Just any bare metal on it.

I usually go with the light switch/outlet screw but you said those are covered. There must be grounded metal somewhere in your house. The microwave body, a pipe or faucet, you could even get one of those grounding wrist straps that plug into the ground port on your wall socket.

Absolutely, if full local control is what you want and you expect to get more devices then it’s worth either reusing an old computer for home assistant or getting a home assistant yellow.

Yeah, I don’t blame you not wanting to commit to a hub if you’d only have this thermostat.

Depending on what features you want maybe you could find an offline one with those features built in. I know there’s ones with schedules and presence detection that are fully offline.

I’ve used this zwave thermostat for a few years now and it’s done fine. Only really makes sense if you already have a Z-wave compatible hub though.

https://a.co/d/aEr4gaq

This happens to me when I have a Bluetooth keyboard connected to the Chromecast. Others have already suggested but switching virtual keyboards should fix it.

Demonstrating that the bottom 99% has had wages increase 50% since 1979 while inflation has decreased the value of the same currency by 320% is damning. There’s no good defense for capitalism here.

It does match exactly what’s happening though. Others have mentioned housing cost which is a clear example, but you can also look at income inequality. Here’s an article which cites data from the congressional budget office https://inequality.org/facts/income-inequality/

It shows up to 500% growth since 1979 in the earnings of the .01% while the 99% of earners are only making about 50% more than in 1979. That data makes it clear that wealth is being concentrated, and that people at the bottom are going with less. Especially considering inflation since 1979 has been 320% (source)

I’m running an Ender 3. Although through the 3.5 years I’ve had it it’s had so many parts changed and upgraded it’s turning into a real ship of Theseus. Upgraded the mobo, hotend, direct drive extruder, raspberry pi for octoprint, enclosure, and bltouch for bed leveling.

It’s definitely been a rewarding hobby, learning to use fusion and building things from scratch.