Here’s an archive link for a windows binary: https://archive.org/download/ryujinx-1.1.1403-win_x64

PEI is one of the best surfaces you will ever find to print on, although I believe one type of filament (I think a variation of PLA?) sticks too well and can damage the PEI trying to take prints off…

That’s PETG. I avoid using smooth PEI plates like fire when PETG is loaded. Even after swapping the filament to PLA, little bits of residual PETG can still stick leaving a shadow on the plate. Textured PEI is mostly fine, but single layer stuff like brims are a pain to get off.

From what I understand it tests the minimum retraction distance you need to avoid stringing. The lower you get the less retraction you need. For example, for me usually it stops stringing around 0.4mm retraction (that’s 4mm measured from the hot plate), but found that in real conditions the default 0.6mm works better. I don’t find this test too useful, for me it fails to demonstrate the spectrum between too little and too much retraction, a feature I appreciate in the pressure advance tower. Apparently the moment it stops stringing, anything after that won’t show you anything new and it’s best to stop the print. Either that or I fail to notice any defects when the retraction is relatively high.

There’s a request made here. Haven’t seen devs reply yet though.

I’m thinking about getting some of those activated alumina beads. I’ve heard they are both more efficient at absorbing moisture and can be recycled indefinitely without degrading. Sounds like a perfect fit for your setup.

Dry and then store in a controlled environment. I’m using those bog standard cereal containers from Amazon (3,7-4l container should do for 1kg spools). Add some desiccant, spool rollers and a hygrometer and you have yourself a semi-permanent home for your spools. Mine show somewhere between 10% and 15% humidity, so that’s pretty good considering that previously just leaving a spool in open air for a single longer print caused it to soak enough moisture to ooze and string by the end of the print, and that’s in “only” over 40% humidity. So yeah, highly recommended.

Two that I know of that made decent games is K-D Lab that made Perimeter and Vangers (both open sourced and recently remastered), and Nikita responsible for the Parkan series. They’re not by any means greatest hits but they’re unique and worth checking out.

EDIT: And oh, Pathologic by Ice-Pick Lodge too, but I haven’t played those. Those seem funky and definitely not for everyone.

EDIT2: There’s apparently a list of Russian made games on Wikipedia , good to know.

Not the person you’ve replied to, but I’ve got a Roborock Q7 Max. It’s cheap and relatively simple. It’s got a LIDAR and proximity sensors, but no obstacle avoidance or stair/cliff detection and no camera. From what I can see it’s also silent (no network activity) even though it’s bound to my WiFi. After months of using it I’d say its been a great choice to splurge on. Never had one, never thought I’d need one, but after seeing dust settling on every bit of the floor every day… I got tired of sweeping.

Exactly this. You’d be surprised how much dust it can collect. After a week or two in my small home it can easily collect a fistful of dust, and that’s just from me alone.

I hear you. There’s always Valetudo. Get yourself a supported vacuum and install Valetudo whenever you feel the need. Had my robot for half a year but haven’t come around to doing it just yet. Maybe after its warranty runs out.

If you’re running it in docker you can just check the logs, I do it like this: docker compose logs -f lemmy, and see if you have requests from any instance in the log stream. For me it goes pretty fast, but you can always ctrl+c to exit and scroll up to see what you’ve missed. Might not be the most optimal way, but it works for me.

Had to replace my UPS battery just a few days ago after a power outage reminded me that a replacement was well overdue. I share your feeling, now I can sleep knowing a power blip won’t knock out my servers and mess up my data.

Yea, I had to make a crontab task that resets lemmy every day. Hope it gets fixed in the future but for now it sorta works.

This may help: Container compatibility. MKV files will be remuxed when played via WebUI. Try playing an MP4 file and see if it’s the same.

Just MusicBrainz and a general music folder. I either use a SMB share or Navidrome to listen to my library, depending what’s most convenient. I’ve noticed that Lidarr generates huge traffic spikes when it fetches album info, rate limiting it on my Pi Hole, so I’ve stopped using it. I don’t like the idea of automating downloading music anyway, I prefer to listen to it first then download if I like it.

Since I’ve started automating stuff I’ve got myself an Acurite wireless fridge and freezer thermometer (initially found out about it on Reddit, before it all went to shit and all). It both has a nice magnetic display and it transmits in 433MHz band, so a SDR dongle plugged into my Home Assistant machine can receive the temp readouts. So far it didn’t prevent any disasters, but at least I know how hot it needs to get for the fridge to start having trouble keeping cool.

There’s a freeware (open source but copyrighted art) shooter called World of Padman, that’s pretty much what you’re describing.

EDIT: You wanted “modern” but, it’s slightly less so. Sorry.

I’ve never self hosted, started maybe two years ago. First I’ve started with a Raspberry Pi 3, but quickly decided that 1GB of ram, and limited power was not enough for my needs. I’ve got myself a Dell OptiPlex SFF (used), it came with 16GBs of ram, then I’ve added a 4TB HDD. I’d say, this is an “entry” piece of hardware, as it’s cheap and sips power (around 15-20W at idle). If you don’t need the disk space or much power, go with a micro (whichever manufacturer you chose, HP, Dell, IBM), they’re cute little boxes that make a RasPi seem both underpowered and overpriced (for a used one anyway).

Ironically Nitter stopped working lately, since Twitter started requiring users to be logged in to read anything.