tjhart85

I don’t know if you like podcasts, but Know Your Enemy is a take on the right from two leftists who used to be conservatives who approach it from an intellectual POV.

I linked to the political magazine that helps support them since it gives some rundowns of their topics that might give you some of the sources that can be read instead of listening to their podcast, if you’d prefer.

Right?! Super easy to be “privacy focused” when you just flat out refuse to acknowledge anything as personally identifiable information!

As long as you’re not talking about throwing Molotov Cocktails at their CEOs, I don’t really see how that would matter

Bookstack has a pretty robust API for things like adding/exporting content even if the UI doesn’t always have a way to do things.

Might be worth looking at this ready-made script and see if it serves your purpose (at the very least just to make your shift from BS a bit easier): https://gist.github.com/ssddanbrown/45acb913a7b873240b2d89781e74a7a4

Interview With a Vampire … kind of … Lestat was by no means good to Louis, but their portrayals in the rest of the series was quite different … I think that Anne Rice was trying to show that neither of them should be considered reliable narrators and Louis will always try to portray his situation as awfully as possible and Lestat is a narcissist and will always try to portray himself in the best light even when acknowledging what he did incorrectly.

But, when I saw that book 2 was about Lestat, I was like … wtf … I hate this guy, why would I want a story with him as the main character and then I read them all, lol.

Conversely, I think that every program should have a way to operate it from the command line and the GUI can just needlessly get in the way a lot of the time `¯_(ツ)_/¯
You write a command once and you can do whatever you want with it, repeatably, forever. It’s fantastic! You can then pipe the results into a completely different program all without needing to do much of anything! Want to run it on a schedule? Easy! Want to send the exact parameters you used to someone else? Easy! Want to copy and paste the exact output? Easy! Want to get a daily email with the results? Easy!
Some things are better with a GUI, but, plenty don’t need it.
With all that said, I understand why a dev who didn’t build their program with CLI in mind wouldn’t want to go in afterwards and add it in, especially if they don’t use/like CLI interfaces.

I’ve seen similar arguments to yours that every program should have be packaged as an exe, because fuck those fucking programmers thinking I should need to install python to make their shitty programs work. The devs are like “I don’t use Windows and wouldn’t even know how to package it as an exe and even then, I wouldn’t even be able to test that it works, python just works for everyone” and then the guy just continues to go off on a similar rant to yours about how ridiculous this is.

Besides, even if it had a GUI, the complaint would be “why don’t they make their software do the things that people want it to do‽‽‽” and then going off about how easy this {insanely complicated thing} would be to add in and EVERYONE {nope, just you} needs this function in order for this software to be useful and the dev is just a POS for not adding it.

Like, I get your point if you’re paying for software that doesn’t make it clear it doesn’t have a GUI, but if you’re just on github using someone elses software that they made for themselves and thought other people might like, why are you bitching? Just move on to another piece of software that can do what you want and has a GUI (I’m going to guess you can’t/won’t because those cost money and you wouldn’t be able to belittle and harass the actual software creators and that’s half the fun for you).

On KBin I believe that it is (or at least was a bug that became a feature). There have been posts about it strongly urging Ernest not to change it and he’s said he’ll open it up to discussion before making major changes to it, if my recollection is accurate.

I use Synergy for the KB/Mouse sharing.

You basically just load software on all wanted systems and tell the software where their screens are and you can seamlessly move your mouse from screen to screen and system to system. You can optionally allow it to keep the clipboards in sync too.

I got in on it like 10 years ago as part of a crowdfunding campaign, but they’re still around and look to be relatively reasonably priced.

Name of the room + number.

I’ll give the human readable name a bit more info like if it’s a fan (then it’s ‘Kitchen Fan 1’, ‘Kitchen Fan 2’, etc…), but I’ll usually make a group and expose the group to voice and the group would be based on the human name (Kitchen Fan). For most rooms though, I only really care about the room itself, so, “turn off the kitchen lights” is all that’s really needed and that’s handled by the zones.

We had two of the dumb versions in the kitchen and I was forbidden to install anything smart in there until I found something similar. Then a year later, they made the smart version.

10/10 would recommend, it’s expensive since you’ll also need a hub, but I’ve had less issues with them than my Hue’s at this point.

I’ve got a z-wave dimmer and every now and then it’ll just flip out and start dimming the light for no reason (goes to 1% and then rises to 100%) and needs to be power cycled to fix.
I’ve got my Kasa dimmers, but they just feel cheap. I’ve started hiding those away for locations they’re not really needed to be touched (attic lights, closet lights, etc…)

OP – I would whole heartedly second @lemming741 's recommendation. They’re very good and very intuitive to use in a non-smart fashion as well.

ETA: I’ve had internet die and they continued working as well.

Same, but the Vue 1.

Works very well by my panel looks a fuckin’ mess because of it!

OP, it’s not ‘money is no object’ because it’s actually pretty cheap, but it’s actually very easy to flash and install, so, if I were to do it again, I’d probably choose the same hardware since it went pretty smoothly.

Forgejo: for when you really don’t want to have to sanitize your scripts and don’t want to leak passwords, but want version control and a nice webui

In a right to work stste

Some cities and counties have additional protections, but at the state level, the only one that’s not at-will is Montana and the entire population of that state would fit in a single decently sized city. So, I think that’s a distinction that wasn’t really necessary, but you do you.

I’d say support, whether it be official or unofficial is a thing you didn’t mention.

Try googling any printer you’re looking at + any random common error (not sticking to bed, not heating up, slicer options, etc…) and see what kind of results pop up and if they look helpful.
Look up parts costs and see how they look and if they’re proprietary or not.
See if there are official maintenance recommendations, etc…,

One of my printers is one that has ZERO support from the community and what you can get from the manufacturer is limited and it kind of sucks when I have problems with it.

Enders for all their faults at least have an insane community support (note: in 2024 I would never recommend an Ender 3/5 as a first printer).

My most reliable printer is a Qidi Smart-3 … vendor support has been great and the Facebook groups for it have been good too. The downsides: z-offset is manual & it’s 185x185 which is pretty tiny and it’s a bit of a pain to change the filament.
Upsides: core xy, fast, reliable, klipper
From what I’ve seen though, quality control is hit or miss, but the manufacturer seems to take care of you, so YMMV, mine hasn’t had problems that weren’t self induced.

Do you just throw your garbage on the ground so janitors have something to do too? Pat yourself on the back while doing it?

From what I’ve seen: Linus didn’t ever typically rip into first time contributors, it was usually always the people that he either expected better of or people that just kept submitting crap after crap.

Still sucks to be on the receiving end of it though.

Very true!

At least non-cops can only scope out your place for a future robbing, be a perv or plan to blackmail you.

An officer can do all that and also kill you with an almost 0% chance of facing any consequences!

TFA has an example of a fake warrant being used and the fake being clearly fake but accepted anyways.

I know a few people who happily have ring doorbells in their house as cheap cameras and don’t seem to care at all that all an officer has to do to get INTERIOR footage of their house is to ask for it and they get it no questions asked.
I hadn’t even thought of how easy that makes it for non officers to just do the same thing.

I’ve got a Qidi Smart3 and it’s made me enjoy 3D printing again!

I’ve got 3 other printers and they’re such a chore, but the Qidi is just a little powerhouse that works fantastically. Qidi needs to come out with competition for the Bambu AMS and they’d have more of my money in a heartbeat.

The article, while interesting feels like 3-4 articles copy/pasted together haphazardly